Product information

The WT 700 with 5-section extension boom, an additional 2-section telescopic yboom and fully variable H-shaped stabilisers is mounted on a 33 t-chassis with four axles. With a standard cage and retracted  yboom up to 700 kgs of nominal load are possible. Due to an intelligent LML as well as WUMAG innovations e. g. the 0°/2° switch combined with an electronic spirit level, at each given stabiliser configuration and nominal load the largest lateral reach can be obtained.

Depending on use, different kinds of cages can be mounted, equipped with relocatable graphic-display control panel. The hydraulically telescoping cage offers an enormously large  oor space without nominal load reduction on the mobile part. With the optional WUMAG Powerlift system the handling of laminar external loads such as glass façades etc. becomes easy and problem-free.

Each WUMAG ELEVANT hydraulic platform’s turntable remains within the contour of the exterior mirrors when slewing.

Technical Data WT 700

• Working height  max. 70,00 m Swivel angle of the cage  2 x 80°
• Cage floor height  max. 68,00 m Travelling length*  approx. 13,75 m
• Reach (standard cage)*     36,00 m Travelling width*  approx.  2,50 m
• Nominal cage l oad  max.   700 kg Travelling height*  approx.  3,98 m
• Turntable rotation  540° G.V.W.*  from  33.000 kg
• Cage boom angl e  175° Permissi ble inclinati on  max.   2°
• Cage measurements (L x B x H)
• Standard:   2,47 m x 1,05 m x 1,10 m
• Telescopic:   3,88 m x 1,05 m x 1,10 m

Standard equipment

•  Assembly onto a suitable chassis (also all-wheel)
•  Stable chassis covering made of aluminium bulb plate
•  Aluminium side walls mounted on the chassis decking
•  Extensive anti-corrosive package
•  Continuously variable stabilising width/outreach adjustment
•  Automatic stabiliser levelling
•  Four spreader plates with brackets
•  Interchangeable aluminium cage
•  Cage centering (transport position indication)
•  Door on one cage side for comfortable, upright entrance
•  Four anchor points for safety harnesses in the cage
•  Relocatable control panel with protective cover and illumination of display and push-buttons
•  Reversible slewing direction after panel relocation
•  Fully- edged secondary/emergency control at the base
•  All movement functions have end stop damping
•  Automatic self-retracting into basic position (“Home function”)
•  Cage capacity monitoring with display indication
•  Cage contact safeguard
•  Motor-start-stop from all control panels
•  Emergency lowering system in the cage
•  24 V emergency pump
•  Battery voltage monitoring in the cage
•  Preparation for teleservice
•  Electric power line 230 V/10 A with RCD
•  Earthing device from cage to base
•  CE-mark, declaration of conformity, test certification